John Deere 3130

Production: 1973 - 1979  

Production
Manufacturer:	John Deere
Factory:	Mannheim, Baden-W眉rttemberg, Germany
The John Deere 3130 saw a redesign in 1975 at tractor serial number 182150. The front, hood, and decals were changed to a more rounded appearance. The 3130 was sold as the 2840 in the United States.

Variants
3130LS:	12-speed

John Deere 3130 Power
Engine (gross):	96.5 hp 72.0 kW
Engine (net):	87.2 hp 65.0 kW
PTO (claimed):	75.1 hp 56.0 kW

Mechanical
Chassis:	4x2 2WD
4x4 MFWD 4WD
Final drives:	planetary
Differential lock:	mechanical rear
Steering:	power
Brakes:	wet disc
Cab:	Open operator station. Cab optional.
Transmissions:	12-speed
6-speed sliding gear

Capacity
Fuel:	28 gal 106.0 L
Hydraulic system:	15 gal 56.8 L

Hydraulics
Type:	closed center
Capacity:	15 gal 56.8 L
Pump flow:	23 gpm 87.1 lpm

Tractor hitch
Rear Type:	II
Control:	position and draft control
Rear lift:	7452 lbs 3380 kg

Power Take-off (PTO)
Rear PTO:	independent
Rear RPM:	540/1000
Engine RPM:	540@2200 1000@2200

3130 Serial Numbers
Location:	Serial number plate on the front-right of the 3130 tractor frame, above front axle.

Electrical
Ground:	negative
Charging system:	alternator
Charging amps:	28
55
Charging volts:	14
Batteries:	2
Battery volts:	12
Battery AH:	88

Engine Detail
John Deere
diesel
6-cylinder
liquid-cooled
The 3130 engine could be ordered with an optional turbocharger (TA 3401) as an altitude compensator.
Displacement:	329 ci 5.4 L
Bore/Stroke:	4.02x4.33 inches 102 x 110 mm
Power (gross):	96.5 hp 72.0 kW
Fuel system:	direct injection
Air cleaner:	dry
Compression:	16.2:1
Rated RPM:	2500
Idle RPM:	650-2660
Operating RPM:	1300-2500
Torque:	218.3 lb-ft 296.0 Nm
Torque RPM:	1300
Starter volts:	12
Oil capacity:	10.9 qts 10.3 L
Coolant capacity:	20 qts 18.9 L

Dimensions
Wheelbase:	96.9 inches 246 cm
Length:	157.5 inches 400 cm
Width:	81.8 inches 207 cm *Minimum width.
Height:	103.5 inches 262 cm
Weight:	8200 lbs 3719 kg
Rear axle:	Flange
Rear axle:	Rack-and-pinion
Front tread:	56.9 to 77 inches 144 to 195 cm
Rear tread:	63 to 78.7 inches 160 to 199 cm (flange)
Rear tread:	63 to 99 inches 160 to 251 cm (rack-and-pinion)